JWC GROUP is in the aim to produce high quality production lines.
Technical Perameters:
1. Model: JWC-CFD-SV
2. Designed speed: 220 M/Min；
3. Real production Speed: 200 M/Min
4. Product size: L: (350-1500)mm ×W(300-900)mm
5. Electricity: 380V 50HZ
6. Installation Capacity: 200kw(including glue applicators) ,Breaker: 400A
7. Real running capacity:140KW Cable: 3×95mm2+1×25mm2+1×16mm2
8. Air compressor: ≥0.6mpa ,1.5m3/min
9. Qualified rate: ≥99.9% (exclude the factors of glue applicator and splicing material and conjoint material)
10. Machine size(without crusher): 25×8×4M (L×W×H)
11. Working space : 29×12×5M(L×W×H)
12. Total Weight: 70T
13. Container: 3×40HQ+1×20GP
Auto control functions:
1. All electrical parts strictly pass CE standard.
2. Total 3 kinds raw materials using 6 servo motors make the raw materials automatic unwinding, tension control, automatic splicing and changing raw materials without slow down the speed.
3. There are total 9 sets web guard system(depending on use) to control the different kinds raw materials. The +-1MM accuracy ensures the right precision and less the raw materials width for economic cost.
4. PLC+touch screen +frequency control system. Adopt man-machine operating interface. To press the programmable menu for every operation. Every dates can be easily adjusted, recorded and seek.
4.1 Quantity of SAP and Fluff pulp can be set up on the touchable screen
4.2 Touchable screen can control the main machine speed, the current speed can be shown on the touch screen.
4.3 The machine will automatic stop if the electrical equipments broken, touch screen will shown the error and save the error records.
4.4 Single shift output quantity and total production output quantity can be shown on the screen.
5. Auto checking for raw materials: When any of the raw materials lacking or breaking off, the machine can be shut off automatically at the shortest time to decrease the defective.
6. Auto checking and rejecting for all raw materials spliced part by fiber sensor.(reqire the conntection parts of raw materials has color mark).
7. Auto rejecting spliced and other defective products to increase acceptance rate. The photo sensors auto check the defective parts and feed back the relative signals to the PLC. The PLC calculates the distance between the defective product and rejecting outlet and the defective product goes through the rejecting outlet the blowing hole activates to blow it away.
8. The pemperature can be controlled by Mercury conducting ring .Each unit adopted individual digital temperature indicator. Each data is set on requirement to meet different consumption. The real time temperature can be fed back to the PLC and displayed at the interface screen.
